|
+ Specifications
- CEA Rated: Yes
- Power Output: 854 watts RMS x 1 channel at 4 ohms and ≤ 1% THD + N 1300 watts RMS x 1 channel at 2 ohms, 14.4V supply and ≤ 1% THD + N
- Signal-to-Noise Ratio: 72 dBA (reference 1 watt into 4 ohms)
- Dynamic Power: 1516 watts at 2 ohms
- Effective Damping Factor: 6.357 at 4 ohms
- Frequency Response (-3dB): 17Hz to 302Hz (-3dB)
- Maximum Input Signal: 5.7V
- Maximum Sensitivity: 260mV
- Output Regulation: .132 dB at 4 ohms
The high-frequency Class D switching power supply used in the Reference 1210a is more efficient than traditional class A/B supply’s and draws less current from your vehicle’s charging system.
The Reference 1210a features a 12dB per octave electronic crossover, allowing you to optimize bass performance based on enclosure type and subwoofer selection.
Dynamic Bass Optimization (DBO) - This provides variable filtering with adjustable "Q" below 100Hz, far beyond conventional "Bass Q" circuits, by allowing the low-frequency output to be optimized for specific subwoofer applications. Frequencies below an enclosure's tunign frequency can be attenuated, preventing damage to the subwoofer and allowing the amplifier's power to be better utilized.
Full-range preamp outputs faciliate use of multiple amplifiers without the need for noisy and expensive adapters or signal splitters.
Optional remote level bass control available. | 
+ 
Tính năng chi tiết 
